Description
Parche de aplique de cuernos largos: calavera de toro brillante, insignia de vaquero del oeste de 4" (termoadhesivo)
Añade un toque de estilo western a tu ropa o accesorios con este parche de apliques Longhorn. Con un diseño de calavera de toro brillante, este parche es perfecto tanto para vaqueros como para vaqueras. Mide 4" x 2-1/4", es el tamaño perfecto para chaquetas, sombreros y bolsos.
Características principales:
- Planchado: fácil de aplicar con plancha, no requiere costura.
- Coleccionable: un artículo imprescindible para cualquier entusiasta o coleccionista del Oeste.
- Alta calidad: fabricado con materiales duraderos para un uso duradero.
¡Mejora tu estilo con este parche de aplique Longhorn hoy!
Application Guidelines for Iron-On Patches:
-
Before applying the patch, set your iron to the maximum heat setting (cotton) and allow it to heat up for
approximately 3 minutes.
-
Test your fabric's heat tolerance at this setting by doing a single pass with the iron on the garment to avoid
any damage to the fabric.
- Place the patch on the desired location, then cover it with a cotton cloth or Teflon sheet.
-
Using the heated iron, press down firmly on the patch, especially on the edges, and hold for 30 seconds.
-
Turn the garment inside-out, then use the heated iron to apply pressure to the back of the patch for another
30 seconds.
- Remove the iron and let the patch cool for approximately 5 minutes.
- For an even more secure hold, it is recommended to sew around the edges of the patch after ironing.
Please note that we cannot guarantee that the patch will adhere to all types of fabric.
Patch Care:
Patches can be washed GENTLY when attached to a garment. When machine washing, it is advisable to turn the
garment inside out, secure or close any zippers, hooks, or other items that may snag the patch threads during
washing. We recommend washing on the gentle cycle with cold water and allowing it to air dry. It is important to
note that ironed-on patches may have loosened adhesive after machine washing. Therefore, we highly recommend
sewing the patch or the corners of the patch if you choose to iron it on.
